Tomcat® Sport V2.0 Premium Walk-Behind Scrubber w/Edge - 28" x 14", 130 AH Wet

Tomcat® Sport V2.0 Premium Walk-Behind Scrubber w/Edge - 28" x 14", 130 AH Wet

Item # 155V2-28TE

  • Edge benefits are chemical free stripping, reduce slip and fall potential, 70% reduction in water usage and VCT prep and recoat.
  • Chassis construction: 3/16" steel powder coated; Edge motor: 1.0 HP/2500 rpm
  • Power system: 24 VDC/130 AH Wet
  • Run time: Up to 2.5 hours, based on continuous scrubbing run times
  • Drive system: 0.75 HP, all gear/sealed and pad
  • Solution tank: 12 Gal. w/graduated site tube; Recovery tank: 15 Gal.
  • Demisting chamber: 1.25 Gal.; Drain saver: 30 cubic inches
  • Vacuum power: 0.8 hp/3 stage/5.7"; Waterlift/Airflow: 68"/72 cfm
28" x 14", 130 AH Wet, ea
Alternate #155V2-28TE

Great for automotive shops, machine shops and warehouses. Largest brush/pad selection, lowest maintenance cost, best performance on irregular floors, brushes individually driven. Inside the machine: Recovery lid, stainless fill screen, 6' remote solution fill hose, blow by vac muffler, sound deadening foam, tall rollers, patented vac bandeau, stainless scrub deck, bandeau unloader valve, non-marking solid grey tires, steel frame, poly battery box, stainless breakaway squeegee, stainless vac screen, central command, drain saver basket.

Features

  • Tanks tip back without tools, providing easy top side access to all important service items.
  • Quick access allows the technician to trouble shoot from their feet and make repairs quickly, with less chance of creating unintended problems from disassembling 5 items to get to the 1 that failed.
  • Large clear lid provides the operator with a real time view of the dirty water level, foam, debris tray, the vacuum's white dust filter and more.
  • The fully accessible recovery tank is easily our most significant feature for cost reduction. Open the lid to clean out the recovery tank, eliminating odors and other contaminants which can become airborne and inhaled by employees.
  • We spend the extra time and money to through-bolt with stainless fasteners for longevity and service ease in the future,
  • All assemblies mount directly to the 7-ga (3/16" thick) steel frame, instead of plastic parts that will fatigue in time.
  • Accidental damage to caster, or over tensioning the frame during transport will not damage our tanks since we don’t bolt collision points to the poly tank.
  • Baffle system is another feature you'll not find elsewhere. Our stainless baffle wall controls foam in the recovery tank.
  • The dirty water passes into our drain saver basket, and then fills up the rear side of the baffle such that the foam doesn't migrate to the front where the stainless screen and ball float operates.
  • The stainless screen and white vacuum filter offer additional protection. These are the first of several steps taken to ensure good airflow (squeegee performance) and protecting the vacuum motor from moisture.
  • The black bandeau is vacuumized and holds 1-gallon of foam or dirty water away from the vac motor, backing up the primary filters and balls screens.
  • The "unloader" valve automatically drains off any residual water when vac is OFF.
  • The yellow muffler box both reduces the noise and also directs any digested water out a tube, to alert the operator to a problem.

Specifications

  • Front Wheels: (2) 8" x 2" solid black
  • Rear Casters: (2) 2.5" x 1.38" non-marking grey
  • Speeds: Forward: 0-230 ft/min/0-2.6 mph; Scrubbing: 0-184 ft/min/0-2 mph; Reverse: 0-130 ft/min/0-1.5 mph